ProSCAN
Process ScannerMulti-channel process scanning for current, voltage, RTD and thermocouple inputs with alarms and Modbus RTU.
View product ProSCANExplore instruments for measurement, process control, monitoring and communication. Browse by product family to find a solution for your application.
Hardware + software data acquisition architecture with USB, Wi-Fi and cloud connectivity.
Current limit/trip, soft start, ramp up/down and unit protection.
Serial conversion between USB, RS-232, RS-485, RS-422, TTL and Wi-Fi variants.
Wide input selection, up to three outputs and optional isolation.
Loop-powered indication with IP65 enclosure options.
Digital set point adjustment and voltage/current source instruments.
Universal and real-time-clock based timing solutions.
Rate switch, totalization and batch control.
Low and differential pressure transmitters.
Single and dual-line ON-OFF process controllers.
Position control for electrically actuated valves using set-point and feedback signals.
Humidity/temperature control and transmission.
Scanning and temperature control using RTD / thermocouple inputs.
Thermowells and multiple sensor construction styles.
Level, volume, capacitance transmission and pump control.
Voltage, current and frequency monitoring.
Automatic mains failure, transfer and fire-pump control.
Alarm buzzers, high-output, voice, battery backup and interface variants.
2-inch, 4-inch and 8-inch jumbo display ranges.
Multi-channel fault annunciation, acknowledgement and trip/alarm grouping.
Process weight indication and accumulated totalization.
Multi-channel process scanning for current, voltage, RTD and thermocouple inputs with alarms and Modbus RTU.
View product ProSCANCustomizable process data acquisition with USB, Wi-Fi and cloud-connected architectures.
View product sDAQSSingle-phase proportional power control with automatic or manual operation and optional current protection.
View product TPRG-1PTwo-phase proportional power control with automatic or manual operation and optional current limit/trip.
View product TPRG-2PThree-phase phase-angle power control with soft start, adjustable ramping and optional current protection.
View product TPRG-3PDIN-rail serial conversion across USB, RS-232, RS-485, RS-422, TTL and Wi-Fi interfaces.
View product rsCON v3Universal signal conversion with up to three outputs and optional input-output isolation.
View product SSC-101Local 4-20 mA process indication with no separate power supply or additional field cabling.
View product LPISelectable precision current, millivolt and voltage source with fine/coarse adjustment and optional Modbus.
View product Vi-SOURCESimple potentiometer-adjusted off-delay timing with relay output and clear status indication.
View product AnalogTIMERReal-time scheduling with twelve ON/OFF set-point pairs, up to four outputs and optional Modbus.
View product ClockTIMERCompact board-level timer with 1-120 second or minute range and configurable sensor triggering.
View product EcoTIMERDigitally adjustable off-delay timer with start, stop, pause, resume and stored set-point control.
View product Ofd.TIMER-DDual-display revolution counting and timing with selectable direction, control inputs and relay outputs.
View product RevCNTRTwelve timing functions, nine time ranges and configurable control, output and communication options.
View product UniTIMERConfigurable flow batching with local control, totalisation and enclosure options.
View product FlowBATCHFlow-rate indication, totalisation and high/low switching in one compact instrument.
View product FlowSWConfigurable pulse-flow totalisation with LCD or LED displays, NAMUR, dual-channel and compensated-weight options.
View product FlowTOTALReliable low-pressure monitoring for clean, controlled industrial environments.
View product DPT-5600Compact piezoresistive low-pressure measurement with field-zero adjustment and current or voltage output.
View product LPT-5600Integrated irrigation sequencing, filter backwash, well-motor protection and fertilizer-stirrer timing.
View product Irrigation ControllerConfigurable ON-OFF or PID process control with universal inputs, four outputs, retransmission, Modbus and data logging.
View product ProCONSet-point and feedback positioning for electrically actuated control valves with automatic, local and manual modes.
View product ValPODual-output humidity control for humidification, de-humidification and configurable alarm duties.
View product HumiCONConfigurable humidity and temperature control with sensor or transmitter inputs and up to eight outputs.
View product HutCONIP65 surface-mount transmitter with simultaneous relative-humidity and temperature analogue outputs.
View product SRHTx-2000Multi-channel temperature scanner with USB pen-drive logging, relay outputs and Modbus RTU.
View product DataLOG-TPC-programmable two-wire temperature transmitter for RTD and thermocouple head mounting.
View product STTX-102Slim DIN-rail transmitter with programmable RTD or thermocouple input and two-wire 4-20 mA output.
View product STTX-201Dual-input temperature controller for differential heating, cooling and alarm applications.
View product TemCON HOTCOMeasure and Indicate Temperature.
View product TemCON-2910It is used for Controlling Temperature anywhere and everywhere
View product TemCON-2920PT100 temperature control from -200 to 850 °C with relay, alarm and delay functions.
View product TemCON-nConfigurable 4 to 16-channel temperature scanning with alarms and Modbus RTU communication.
View product TemSCANTemperature and soak-time sequencing with external start/reset, four outputs and Modbus RTU.
View product TemSOAK-3920Custom RTD and thermocouple assemblies with threaded, flanged and weld-in thermowells.
View product TS / TWFour-level automatic pump controller with pump-up/down selection, manual mode and high/low alarms.
View product APC-101Four-level dual-pump controller with automatic alternation and independent manual operation.
View product APC-102Overhead-tank pump control with sump-low dry-run interlock and dual-tank indication.
View product APC-201Two-tank, dual-pump automation with automatic alternation and sump-low protection.
View product APC-202Field-calibrated continuous level transmitter with rod or rope probe and isolated analogue output.
View product CapTxAdjustable displacer level switching for long-range and high-pressure liquid applications.
View product DLSWFloat-operated reed-switch level transmission with field-adjustable 4–20 mA endpoints.
View product LevRdTxLevel and direct tank-volume indication with pump control, alarms and Modbus RTU.
View product LVCONAC or DC current monitoring with a six-digit event counter and four configurable outputs.
View product AMR CounterAC or DC current indication with independently configurable alarm and trip relays.
View product AMR e-mtrHigh-current shunt monitor with selectable peak-hold indication and independent high/low alarms for NDT systems.
View product AMR Peak HoldThree-phase CT current monitoring with four configurable relay outputs and optional Modbus.
View product AMR-3P e-mtrCompact current trip monitoring with latched indication and manual or external reset.
View product AMR-HR miniCompact three-phase failure relay with automatic reset for DIN-rail or wall mounting.
View product PFR-301DIP-switch cyclic controller that periodically switches compatible 230 VAC loads to reduce unnecessary run time.
View product Power SaverCombined voltage and current monitoring with four independent alarm and trip relays.
View product ViMRAC or DC voltage monitor with over/under-voltage alarm and latching trip functions.
View product VMRThree-line voltage monitoring with four programmable alarm/trip relays and Modbus RTU.
View product VMR-3P e-mtrAutomatic mains-failure, generator starting and load-transfer control with programmable timing and fault supervision.
View product AMF EXCEL-101Generator automation with selectable single- or three-phase mains-failure detection and programmable transfer timing.
View product AMF PLUS EXCEL-102Automatic utility-generator transfer controller for contactors or motorized change-over switches.
View product ATS EXCEL-103Pressure-based sequencing of jockey, mains-powered and diesel-engine fire pumps with mains-failure detection.
View product FP3CONAutomatic fire-pump engine starting from water-pressure demand with fault and failed-command supervision.
View product FpCONOne-, two- or three-input alarm buzzers and mains-failure annunciators with silence, status LEDs and optional remote triggering.
View product ABUZHigh-output one-, two- and three-input alarm buzzers with silence, status LEDs and optional backup or remote triggering.
View product HiBUZRecord-and-playback voice annunciator with built-in microphone, repeat mode and optional visual or remote triggering.
View product VBUZ-1SLong-distance process indication with 2-, 4- or 8-inch characters, analogue or pulse inputs and optional Modbus RTU.
View product JBDUp to eight-channel fault annunciation with acknowledge, reset, test, grouped relay outputs and optional Modbus RTU.
View product PROTEC-ARTProcess weight indication and eight-digit totalization with four relays, retransmission and Modbus RTU.
View product WtCONDetailed models, ordering information and product-specific feature lists are available in the PDF catalogue.